EnSolv-Fluoro FS (Fire Suppression)

Ensolv-Fluoro FS

Ensolv Fluoro-FS (Fire Suppression) liquids vaporizes quickly when released, ensuring that it does not damage sensitive electronic systems such as data centers or server rooms. Additionally, Ensolv Fluoro-FS helps protect irreplaceable paper documents and electronics as it is a waterless fire suppression solution. This product is both non-corrosive and free from any electrical charge.

Can be used as a direct substitute for solvents like 3M, 3M Novec® 1230, and others.

Features & Benefits

Zero Surface Residu
Low Surface Tension
Low Viscosity
NON-Flammable
NO Flash Point
VOC Exempt
High Boiling

Environmental Properties

Zero Ozone Depletion Potential
GWP < 1
Electrically non-conductive
Safety margin >50% over design concentration
Room overpressure venting not required
Minimum space requirements
Minimal clean-up
Environmentally advantageous and cost-comparable alternative to FM-200, ECARO-25, and Halons/HFCs

Applications

EnSolv Fluoro has a quick evaporation rate and preferable environmental properties make this an ideal solvent for use in certain industries. It can also be used as a heat transfer fluid, due to its non-flammability. It can replace HFC, CFC and HCFC in many applications.

EnSolv Fluoro is for INDUSTRIAL USE only. It is not designed for consumer use.

Storage and Handling

EnSolv Fluoro is thermally stable and will not oxidize or degrade during storage under normal conditions. It is recommended to store the product inside a clean, dry area and out of direct sunlight or other heat sources. Do not freeze or store below
32°F (0°C) nor above 90°F (32°C) to prevent leakage or potential rupture of container due to contraction/expansion and pressure changes. Drum pumps are recommended to dispense the solvent from its container. Refer to the Safety Data
Sheet for more information or contact Enviro Tech for further assistance