Vapor degreasing is a critical cleaning process in the aerospace industry, as it is used to remove contaminants such as oils, greases, and other soils from aircraft and aerospace components. These contaminants can interfere with the performance and safety of these components, so it is important to remove them through a thorough and effective cleaning process.
Vapor degreasing is a cleaning process that uses solvents to dissolve and remove contaminants such as oils, greases, and other soils from various types of materials. It is commonly used in a wide range of industries and applications, including:
Is vapor degreasing safe?
When used properly, vapor degreasing is a safe and effective cleaning method. However, it is important to carefully follow safety guidelines and use appropriate personal protective equipment when handling solvents. Additionally, it is important to properly maintain and clean the vapor degreasing equipment to ensure the safety of the cleaning process.
Enviro Tech International is pleased to announce they are an approved source of supply vendor for Northop Grumman – CPMPOUND, CLEANER, SOLVENT intended on light to medium cleaning of interior primed and painted parts.
Precision parts manufacturing demands effective materials selection, minute attention to design details, precise tools and machines, and highly skilled labor. But even a microscopic speck or smudge of grease, oil or dirt on a part can render all of the above useless. For precision parts to fit together to the correct tolerances and for welds to hold, parts must be impeccably cleaned and free of all traces of contamination. Yet, operational efficiency also must be considered. The ideal cleaning system for parts will be both effective and economical.
For many applications, vapor degreasing fits the bill perfectly. Vapor degreasers clean parts efficiently and effectively with minimal labor. They are highly energy-efficient and, because the solvent is purified and recycled within the system for use again and again, solvent costs are extremely low. Vapor degreasers are even space-efficient, taking up very little room in the shop.
In a vapor degreaser, solvent is contained in two containers or sumps — a boil sump and a rinse sump. In the boil sump, solvent is heated to the boiling point, which need not require much energy if the solvent used has a low boiling point. Rising solvent vapors are kept within the sump by means of cooling coils near the top. When they reach the cool zone, the vapors simply condense back into pure liquid and drop back down into the sump. This creates a two-layer cleaning environment within the sump — a vapor layer above and a liquid layer below.
Parts are cleaned by lowering them first into the vapor layer. Here, solvent vapors hit the cooler surface of the parts and condense. As the droplets of liquid solvent drip off the parts, they carry grease, dirt and oil away with them. Once this happens, the parts may be lowered into the liquid solvent in the boil sump where contaminants are further washed away from every nook and cranny.
A last dip into the rinse sump containing pure liquid solvent ensures the removal of any remaining particles of dirt or grease. Finally, the parts are lifted back up past the cooling coils. Here, solvent quickly evaporates, leaving the parts impeccably clean, dry and ready for the next stage of the assembly process.
The process for using vapor degreasing to clean machine parts is as follows:
In some vapor degreasing systems, parts are put though a final, ultrasonic cleaning cycle to further remove any traces of contaminants from the parts. When done properly the parts should come out clean, dry and cool enough to handle, whichever method is used.
Vapor degreasing is gentle on parts. It doesn’t subject them to scrubbing, high-pressure spraying or high temperatures. It’s a quick and easy process that requires a minimum of training. And it’s cost-effective, both in terms of energy input and solvent use. You can optimize your solvent efficiency even more by choosing the solvent that best suits the needs of your application. If you would like assistance in choosing the best solvent for your vapor degreasing needs, call us at 708-343-6641 or contact us here today.
1800 North 25th Avenue
Melrose Park, IL 60160
The dock closes a half hour prior to business hours.
© 2023 Enviro Tech International, Inc. All rights reserved
